TESSERA LED FULL

R 2 has been engineered for value and designed to remove unnecessary duplication of connectors and circuitry in a panel's design, giving a cost-effective overall solution. Alternatively a simple carrier board can be used to adapt R 2 to match other common form factors for compatibility with existing desings. As such it can be integrated directly onto a panel's hub or spine board for the smallest and lowest-cost solution. It plugs into DDR2 SO-DIMM sockets that are widely and cheaply available. R 2 是 Tessera LED 视频处理之新型接收卡。其额定像素容量为 64K，支持极高分辨率，适用于各类 LED 显示屏。R 2 支持使用 Tessera 之整套功能 - 详见。Īt just 68x32mm R 2 is up to 6 times smaller than its predecessors and has just a single connection along the edge of the circuit board.

TESSERA LED FULL

R 2 also includes Tessera's full feature set - see for details. With a nominal 64K pixel capacity, R 2 is suitable for many types of panels, including very high resolution panels. R 2 is the new receiver card for Tessera LED Processing.

Note the information in this document is preliminary and subject to change without warning. In no event (and to the greatest extent permitted by law) will Brompton Technology or its licensors be liable for any damages arising out of the use of this information in whole or in part. Brompton Technology does not warrant that this information is error-free or that defects will be corrected.

This information is provided without any representation or warranty concerning its suitability for your application or concerning the performance or results you may obtain by relying upon it. It is permitted to use this information in whole or in part when designing products that will work with Brompton Technology protocols or processing and by using this information you accept these terms and conditions. It should be treated as confidential information. This information is the property of Brompton Technology and its licensors. 版权所有 © 2014-6 Brompton Technology Limited. Copyright © 2014-6 Brompton Technology Limited.

Tessera led